![\"KMP](\"https:\/\/www.kenflo-pump.com\/blog\/wp-content\/uploads\/2022\/09\/kmp-monoblock-pump.jpg\" "\\"KMP")
<\/p>\n<\/p>\n
Back-pull-out monoblock pump made in accordance with ISO2858 and ISO9908 standard. Compact design, high reliability, energy saving and low NPSH. Suitable for air-conditioning, fire-fighting, water supply and treatment, irrigation and other general industries.<\/p>\n
1\u3001 Product introduction<\/strong> 2\u3001 Product features<\/strong> 3\u3001 Technical parameters<\/strong>
\nKMP series centrifugal pump is a new generation of pump products with high efficiency and low maintenance rate developed and designed by kenfulai (Foshan water pump factory) using high and new technology. Its excellent hydraulic model and structural characteristics ensure that users can effectively reduce the operation cost of the pump in various applications.<\/p>\n
\n1. The size of the pump body shall comply with the international standard of iso02858 (GB \/ t5662), and the technical conditions shall comply with iso9908 (GB \/ t5657)
\n2. With other products meeting the requirements of international standards, it has the same performance and interchangeability of pump shell connection, shorter axial size and less floor area.
\n3. Structural design for improving quality: the pump body adopts the form of high-efficiency volute.
\n4. Single end mechanical seal, suitable for occasions where leakage is not allowed.
\n5. The pump and the motor are directly connected through the direct connection frame, and the structure is simple and compact.
\n6. Impeller balance, G6 Level 3 balance accuracy level.
\n7. KMP direct coupled centrifugal pump has a total of 22 specifications of products, which can provide hundreds of performance options with different impeller diameters and different speeds.<\/p>\n
\nSuction diameter: 50 ~ 150mm;
\nDischarge diameter: 32 ~ 125mm;
\nFlow: 400 m\u00b3 \/ h;
\nLift: 160m;
\nPressure bearing of pump casing: 1.6Mpa;
\nMedium temperature: – 15 \u2103 ~ + 104 \u2103<\/p>\n