![\"KPS](\"https:\/\/www.kenflo-pump.com\/blog\/wp-content\/uploads\/2022\/09\/kps-double-suction-split-casing-pumps.jpg\" "\\"KPS")
<\/p>\n<\/p>\n
Comply with ISO 9908 international standard.
\nHigh efficiency and low noise,strong and durable.
\nImpeller dislocation design,double shaft extension.
\nLow pulse and no axial force;convenient maintenance.
\nObtain CE certificate and China Energy-saving Product Certificate.<\/p>\n
1\u3001 Product introduction<\/strong> 2\u3001 Product features<\/strong> 3\u3001 Technical parameters<\/strong>
\nKPS single-stage double suction centrifugal pump is a new product of our company. It is a new generation of pump products developed by the advanced hydrodynamic calculation method CFD computer-aided design method. It has the advantages of high efficiency, low pulse, low noise, durability and convenient maintenance. It adopts the structural form of single-stage, double suction, volute horizontal split and support at both ends. The efficiency of KPS series pumps has reached the GB19762-2007 limited value of energy efficiency and energy saving evaluation value of clean water centrifugal pumps, obtained the certification of energy-saving products, has been listed in the list of government procurement of energy-saving products, passed the CE certification of the EU and obtained the pass to enter the EU market.<\/p>\n
\n1. The pump body adopts the form of high-efficiency volute;
\n2. The impeller is a two-way flow symmetrical structure with low pulse and optimized hydraulic performance;
\n3. Double shaft extension, both ends of the pump shaft can be driven, and which end of the drive end is located at the pump can be arbitrarily selected by the user according to the security position;
\n4. Sealing form: packing seal, single end mechanical seal and other sealing forms are available;
\n5. Balance test: G2 for impeller Level 5 balance test;
\n6. Coupling: diaphragm coupling with strong ability to compensate the misalignment of two axes, high traditional efficiency and obvious damping effect is adopted;
\n7. Bearing: imported heavy-duty bearing;
\n8. Materials: mainly HT250, HT250 + SEBF spraying, 1.4460k duplex stainless steel and other materials.<\/p>\n
\nLift: 6.25m-170m
\nFlow: 66m\u00b3\/ h-25000m\u00b3\/ h
\nPump diameter: suction 150 ~ 1400mm, discharge 100 ~ 1200mm<\/p>\n